Smok RPM80 Pod System VW Starter Kit

Smok RPM80 & RPM80 Pro: 5mL/80 Watt VW  Mesh Pod System

The  Smok RPM80 RPM80 or Pro is the most powerful version RPM40 by Smok. Device update is powered by a single battery 18650 (RPM80 Pro) or a built-in battery 3000mAh (RPM80) of capacity filling sheaths with respect RPM40 4.3 ml of 5 ml and 80 watts of power crest instead of 40 watts. In addition, RPM80 has a color screen, the variable power settings and net new coils for steam and good taste. For those of you who want power on the spray system is almost identical, the last Smok see RPM160.

Review
Smok RPM80 RPM80 Pro vs.
Powered by a single replaceable 18650 cell, system pod Pro RPM80 has long vaping without charging. The battery compartment is easily accessible by a hinged lid down or can be recharged through a USB port on the bottom of the control panel. RPM80 built with standard 3000mAh battery which can be recharged via the USB interface integrated micro filler. You should get one if you do not already have a little more time alone vaporizer 18650 Pro, but less profitable a 18650 in your collection.

CI-80 chipset
This new mod style spray box kit is powered by the latest IQ-80 chipboard really stand out in a crowded field gondola system on the vaporizer market. As a result, the device can produce up to 80 watts of power and has a wide range of integrated security protection.

Color Screen with a new user interface

So similar to the less powerful RPM40 RPM80 RPM80 and Pro includes 0.96-inch screen that displays updates the graphic color vaporizer data and the ability to customize the color of your liking. Indicators include information such as the current strength, resistance to the atomizer at this time, the output voltage, the number of power lightning last slide and only costs the 18650 level you entered. You can set the theme of red, yellow, green, blue, white or pink.

80 Watt variable power
With a maximum power of 80 watts, the new device has two strengths of its predecessor and also the most. Adjust the zero power in the range of 1 to 80 watts by control buttons located below the screen.

Two options Pod
Unlike previous devices, coils in the duct refills are not replaced. There are two different fruits available: RGC 0.17ohm conical pod and mesh networks 0.4ohm Pod RPM. Both must make sense and proper steam poetry.

Coil Mesh Cone New RGC
NexMesh based technology, RGC mesh cone coil is designed to provide powerful gusts with a hot blow some large steam generating grooves and good taste. the cone-shaped head has a unique structure to maximize the air flow is lower and to condense the steam as the tip of the droplets, resulting in a delicious taste explosion moves. In addition, the rapid heating coil to further improve the taste and vapor.

Multiple Safety Features
To avoid potential risks, RPM80 Smok Standard and Pro chipset is built with a low battery warning, protection against overheating, short-circuit protection, cut 10 seconds, followed by the breath and the recognition of intelligent coils.

5 ml refill pods
Each nacelle can save 5 ml liquid and an easily loaded through the top portion of the rubber stopper which hide the filling orifice. To ensure that you never run out of e-juice balls is transparent so you can see the level of juice.

Smok RPM80 Pro Features and Specifications

  • mod kit pod-type box
  • Measurements: 26mm x 31.5mm x 118mm
  • Weight: 97.3g
  • choice of colors: black wood stabilization, stabilization of red wood, or liquid, liquid blue,black, white, a resin, 7 colors, carbon black fibers
  • widest point
  • air mass flow
  • Work tank similar to the style in ohms peak drops
  • 0.96 “OLED display
  • Many color themes
  • Menu oriented vertically
  • IQ-80 internal chipboard
  • single battery bracket 18650
  • C-USB charging port on the front control
  • 2 hours charge
  • 5V charging voltage
  • 2A charging current
  • 5 ml pods recovered
  • cone mesh 0.17ohm RGC Pod
  • Mesh 0.4ohm RPM Pod
  • the charging system is easy
  • Transparent to observe the level of juice
  • adjustable power: 1W to 80W
  • the output voltage: 0.5 V to 8 V
  • Input voltage: 3.3 V to 4.2 V
  • Standby current: <200uA
  • Protection of safety
  • Low battery
  • 10s cut
  • Puff monitoring
  • overheated
  • Short
  • atomizer recognition

In the box

  • 5 ml RGC Pod
  • Pod 5 ml RPM
  • Type C USB Cable
  • users Guide
  • RPM80 RPM80 or devices Pro

Leave a Reply

Your email address will not be published. Required fields are marked *