Today I have a new vapeciga vaporesso gen for review. That pod looks first shot look very similar to the famous Caliburn Well, high pod classified vaping community. Not always the opportunity to try Caliburn, so can not compare.
You may wonder what Xros Vaporesso means confirmed: “Xros say” Cross “and the slogan is to cross borders.”
I expected MTL very nice and limited experience DTL this thing, let’s see what happened.
@Vaporesso_Chelsea thanks for sending this kit are intended for this review! Very good to get this cool t-shirt dedicated to Xros
In the frame:
- Battery 1 x VAPORESSO Xros
- 1 × 0.8Ω VAPORESSO Xros POD (2 ml)
- 1 × 1.2Ω VAPORESSO Xros POD (2 ml)
- Cable 1 x USB Type C
- User Manual 1 x
- 1 x Warranty Card
- Reminder Card x 1
For starters, I like the stainless steel metal built from this sheath. It feels durable and put both hands. Seen in this case, as mentioned reminds me of Caliburn, I liked it a lot. rounded edges that make it comfortable gripping sheath and lightweight. I feel it is not very resistant to scratches from the body, because I have some small scratches on my own.
Not much more to it and then load vaping functional and wise. What it made to be easy to use, which means that even has a level of 3 watts. Pod to me as such should be the minimum possible, because I think the pods are often the best tool for those who want to quite smoking. Depending on the nacelle will output 11W (MTL 1.2ohm) or 16W (RDL 0.8ohm).
What was missing in this device is the ability to change the level of watts, as in other similar pods. Have three different levels of energy assistance for broader vapers meet.
The good thing is that it allows both the tugs pull button activated and interesting enabled, it is always good to have both options in a pod. Auto-REACT appeal quickly, and the button is activated so interesting. Personally, I do not use that as an active drawing. You can also change the facts of the basket completely (5 clicks) is an added safety feature, many pods allowed draw not have this option.
trigger buttons are quite small, but it gives a pod sleeker appearance. A good response and the LED as shutter button light enough to say that you are on the battery level (green 70-100%, 30-70% and 0-30% of blue red). Too bad the shutter button is plastic, it would be better if it would also steal steel.
USB-C, who remembers the USB devices swag kit vape show new, this may be one of the first of them. A full charge takes about an hour, and usually attacks easily devices over a full day with 1.2ohm sheath, the sheath 0.8ohm just made a full day. loading and good battery performance in my opinion.
What I find interesting is the method of pod filling. This is the second chamber possessing the filling system (RE Vladdin has one). No need to take the capsule camera, you can not leave the filler funnel and direct, very comfortable. In addition, the transparent sheaths are very good, because the sheath does not flow in the device can see the liquid level without taking pods. Pods snap into place and be flush without knocking.
Perhaps the downside I have for this kit is that the pods are disposable, it would be better to see the replacement coil instead of the entire sheath replacement. You will see this in the price, as two pods cost about $ 11-13, while usually can get 5 reels for the price. Of course, this kit is fairly new, so the price will drop pods overtime.
To make it even better sheath with an adjustable airflow! Not in the car, but on an actual device. A small single lever can move left or right to open or close the airflow. An airflow hole a draw a semi-tight is obtained, very tight, the type of cigarettes drawing. Yet I found, you can get a beautiful strike limited DTL.
How vape? Very good. Since both options are good networks coil flavor of a gondola. In all coils Vaporesso disappoints me. I prefer to use more teeth 1.2ohm, but also provide a shot of small 0.8ohm lung. You can also use 0.8ohm coil MTL if you like hot vaporizer.
However obtaining color grade exterior consists of a single housing, so that for a seamless finish. But at the end of the painting resemble a paint job foiled a brushed metal finish.
While vaporesso target pm80 get code can pull Drawn, sounding the shutter button is perfectly positioned to take the thumb. In addition, the LED status indicator set shutter button bright enough. Also when vaped, the status LEDs indicate the charge level.
Undoubtedly three holes adjustable airflow Xros was a nice feature, which is easily adjustable by the thumb. But it can be accidentally covered by the index.
Photos 0.8Ω mesh sheath Vaporesso Xros Kit sheath
Obviously clear 2 ml PCTG sheaths formed by either making it very easy to see the current levels of e-liquid, which is large. Despite the removal of the filler funnel can be somewhat messy. Due to some particularly strong magnet it is not thin, suitable for teeth Xros with reassuring click.
Undoubtedly Vaporesso Xros perfect for carrying. Especially when Xros weighs 51g and dimensions of only 13 mm from front to back. Furthermore Xros is 112 mm high, with a width of 23 mm.
Undoubtedly this natural pods Vape offers few features, they tend not support a simple and easy experience vaporizer. However, it would be good to see the heating coil in the Vaporesso Xros function.
With a battery capacity of 800 mAh internal battery good pod Vaporesso GTX click in of this size. In addition to the amount of time between charges it is very good and as expected for a device of this nature. Besides feeding 0.8Ω mesh POD 16W, which Xros can last about two days, depending on the use.
Of course, this makes it perfect to explode in shops, or additional injections of nicotine salt Nic Xros.
While many would be happy with the inclusion of a USB-C connector, said Xros 5V 1A charging speed.
In addition, charging and battery level LED shown in Xros before. When the red LED indicates the duration of 0-30% battery charging, blue LED indicates 30-70%. While green LED indicates 70-100% of the battery capacity is left.
In addition, if necessary with the Xros stop charging if a quick spray is needed, and continues to charge after the fire button was released.
Vaporesso photos pod Xros, the funnel is removed to expose the fill port
What is the important pod fill Xros easy Vaporesso and a bit uncomfortable. In addition to disclosing the reconstitution of the joint, I funnel must be removed, which can lead to leakage and-liquid packages fingers. Reconstitution However, once removed is easy to fill and suitable to replace the nozzle.
The important thing is the design of adjustable air flow vapeciga zero pods, allowing easy adjustment. Regardless of restricting the flow of air remains smooth vape selected without turbulence. But while making automatic shooting is slightly delayed, less visible than others on the market. One point to note, Xros automatic dramatically improve air flow inhaled closed.
Undoubtedly the right sheath is easier to replace the spool. Also instead of removing the boot coil and then back into the coil, the sheath is simply removed and discarded. While the new recharge pod and let stand for 10-15 minutes.
A look really smart for the sheath that gives you a good taste. With a stainless steel body and light module to move. The air flow adjustment and USB C may be the best part of this sheath. It would have been nice if the selection watts 3 levels.
This is a good pod for smokers who want to switch to vaping so easy to use, has a pull-activation and convenient charging system.
You can not say that this murderer Caliburn since I’ve never used, but I’m sure it was not mesh coil. MSRP for this kit is $ 30 a boat that is not the cheapest, but worth the price in my opinion. The downside is that a disposable sheaths at the moment is on the pricey side.
Xros free time to 0.8Ω pod tasty with great speed networking products Vape from scratch. fruit especially coming through very well with a wide variety of flavor profiles are generated. But when the weather is above 28C coil 0.8Ω Xros suffering floods. Generate e-liquid being sucked through and mouth. However Nic flavor and salt 20 mg throat hit with one and a half wide open hole in controlling airflow.
Pod mesh Xros 1.2Ω
Obviously pod Xros is 0.8Ω networks winner for taste. Furthermore vaporesso luxe mod click in well net product vaporizer sheath 1.2Ω. But not as tasty 0.8Ω mesh sheath. He also hit 20 mg throat with salt Nic is almost nonexistent.
Powered by a variant of the chipset Vaporesso Axon which VaporessoXROS wrapper offers the following levels of protection.
LED Indication Protection
protective resistance around 5 flashing red
short circuit protection. Also 5 Flashing Red
No load protection. Also 5 Flashing Red
heavy-duty protection also 5 Blinking Red
low voltage protection 3 Flashing Red
Load protection stops charging
Protection against shocks also 3 flashing red
automatic stop protection (8s) flashing red also 3
It is fair to say that Vaporesso Xros was a problem during testing. In addition to the problem of flooding 0.8Ω in the hot coil (28C). Thus, for e-liquid in the mouth when you vaping. However, this did not stop once the climate cooled below 28 ° C.
Another note of Vaporesso “This father International Vaporesso Smoore own people to go and be the first company registered in Hong Kong vaping” Vaporesso congratulations!
You can buy here:vaporesso kit https://www.vapeciga.com/collections/vaporesso