VOOPOO was developed by Christopher Ong for use with laptops. It has since expanded to be used with all portable electronic devices and even cell phones. However, it was originally developed as a VOIP telephone solution and has since then been modified to work with a range of additional devices. There are several different options available for VOOPOO usage including the VOOPOO Pod, VOOPOO Clips and the VOOPOO Accessories.
The original VOOPOO Pod is compatible only with the PnP (portable network interface} coils, although most of these new devices have some limits. The VOOPOO PnP replacements come in a five-pack, which also features natural cotton wicking material and various other coil head configurations. The VOOPOO pod replacement coil pack is not compatible with the traditional VOIP phone adapter as it is typically an aluminium alloy.
The VOOPOO Clips is very similar to the podmod accessory. They come as two separate components with one being pre-attached to the mains of a laptop or netbook. The other is attached to an adapter, which can be plugged into any standard power outlet. These are suitable for use with a laptop or notebook, or even a mobile phone or mobile tablet. They are however not compatible with the typical VOIP phone adapter as it is typically an aluminium alloy.
The VOOPOO Accessories can be used with either the Pods or the Clips. This is because the Pods can be used with a conventional three-pin plug while the Clips require that you use a Fire Button to activate them. You can switch between the two by pressing the fire button on the accessory. The VOOPOO Accessories has two adjustment buttons, one for the volume and one for the switching time. This is again achieved by pressing and holding the volume button whilst pressing the time adjustment buttons.
The VOOPOO Pod Cartridge consists of three main components. The main body of the pod cartridge consists of a standard , a thin stainless steel plate (which houses the heating element) and an inner stainless steel coil. The outer coil is designed to provide a higher resistance to heat than the inner coil. This increases the temperature resistance of the VOOPOO Pod Cartridge and thereby improves the performance of any normal e-liquid that is used in the Pod.
The outer shell of the VOOPOO Pod is constructed from a high grade flexible silicone material and is surrounded by a stainless steel plate for added strength. The outer shell can also be adjusted for a variety of shapes and sizes. These days most vaporators/potables use a disposable heating element rather than a permanent heating unit. A disposable heating element means that you don’t have to waste time and energy heating up your e-liquid in order to use it – the outer coil will keep your e-liquid at the correct temperature.
The other two components of the VOOPOO Pod are its heating element and its coils. The heating element is designed to produce high temperatures quickly and to maintain a constant temperature throughout the mod. This ensures that you get great flavor throughout the entire vaporizing process. The coils on the other hand are designed to provide high quality flavor and vapor production but are also designed to be durable enough to withstand the wear and tear that will occur during use.
The VOOPOO VINCI X 70W Pods have been designed so that they are compatible with the newest mods. They come with two separate power systems: one for normal batteries and another one for the high voltage batteries used to power the coils. Both sets of power systems are made for high quality vapor production and quality flavor. One power system is specifically designed to work with the VOOPOO Gene Chip, the other power system works with the included triple coil. Both sets of coils are made of stainless steel for maximum longevity and quality.